Module:Citation/CS1/Identifiers: Difference between revisions

    From Ban Covert Modeling! wiki
    No edit summary
    (No difference)

    Revision as of 11:15, 13 October 2020

    Documentation for this module may be created at Module:Citation/CS1/Identifiers/doc

    --[[--------------------------< F O R W A R D   D E C L A R A T I O N S >--------------------------------------
    ]]
    
    local has_accept_as_written, is_set, in_array, set_message, select_one,			-- functions in Module:Citation/CS1/Utilities
    		substitute, make_wikilink;
    
    local z;																		-- table of tables defined in Module:Citation/CS1/Utilities
    
    local cfg;																		-- table of configuration tables that are defined in Module:Citation/CS1/Configuration
    
    
    --[[--------------------------< P A G E   S C O P E   V A R I A B L E S >--------------------------------------
    
    declare variables here that have page-wide scope that are not brought in from other modules; that are created here and used here
    
    ]]
    
    local auto_link_urls = {};														-- holds identifier URLs for those identifiers that can auto-link |title=
    
    
    --============================<< H E L P E R   F U N C T I O N S >>============================================
    
    --[[--------------------------< W I K I D A T A _ A R T I C L E _ N A M E _ G E T >----------------------------
    
    as an aid to internationalizing identifier-label wikilinks, gets identifier article names from Wikidata.
    
    returns :<lang code>:<article title> when <q> has an <article title> for <lang code>; nil else
    
    for identifiers that do not have q, returns nil
    
    for wikis that do not have mw.wikibase installed, returns nil
    
    ]]
    
    local function wikidata_article_name_get (q)
    	if not is_set (q) or (q and not mw.wikibase) then							-- when no q number or when a q number but mw.wikibase not installed on this wiki
    		return nil;																-- abandon
    	end
    
    	local wd_article;
    	local this_wiki_code = cfg.this_wiki_code;									-- Wikipedia subdomain; 'en' for en.wikipedia.org
    
    	wd_article = mw.wikibase.getSitelink (q, this_wiki_code .. 'wiki');			-- fetch article title from WD; nil when no title available at this wiki
    
    	if wd_article then
    		wd_article = table.concat ({':', this_wiki_code, ':', wd_article});		-- interwiki-style link without brackets if taken from WD; leading colon required
    	end
    
    	return wd_article;															-- article title from WD; nil else
    end
    
    
    --[[--------------------------< L I N K _ L A B E L _ M A K E >------------------------------------------------
    
    common function to create identifier link label from handler table or from Wikidata
    
    returns the first available of
    	1. redirect from local wiki's handler table (if enabled)
    	2. Wikidata (if there is a Wikidata entry for this identifier in the local wiki's language)
    	3. label specified in the local wiki's handler table
    	
    ]]
    
    local function link_label_make (handler)
    	local wd_article;
    	
    	if not (cfg.use_identifier_redirects and is_set (handler.redirect)) then	-- redirect has priority so if enabled and available don't fetch from Wikidata because expensive
    		wd_article = wikidata_article_name_get (handler.q);						-- if Wikidata has an article title for this wiki, get it;
    	end
    	
    	return (cfg.use_identifier_redirects and is_set (handler.redirect) and handler.redirect) or wd_article or handler.link;
    end
    
    
    --[[--------------------------< E X T E R N A L _ L I N K _ I D >----------------------------------------------
    
    Formats a wiki-style external link
    
    NB. Wikidata P1630 has a formatter URL with $1 placeholder for the ID which could be worked into our prefix/id/suffix
    string, either overriding local definitions (auto-update) or as fallback for identifiers without local definitions. 
    But is expensive and could be risky if WD gets vandalized. 
    
    See Template_talk:Authority_control/Archive_8#Use_Wikidata_as_the_source_for_the_external_link
    
    ]]
    
    local function external_link_id (options)
    	local url_string = options.id;
    	local ext_link;
    	local this_wiki_code = cfg.this_wiki_code;									-- Wikipedia subdomain; 'en' for en.wikipedia.org
    	local wd_article;															-- article title from Wikidata
    	
    	if options.encode == true or options.encode == nil then
    		url_string = mw.uri.encode( url_string );
    	end
    
    	if options.auto_link and is_set (options.access) then
    		auto_link_urls[options.auto_link] = table.concat ({options.prefix, url_string, options.suffix});
    	end
    
    	ext_link = mw.ustring.format ('[%s%s%s %s]', options.prefix, url_string, options.suffix or "", mw.text.nowiki(options.id));
    	if is_set(options.access) then
    		ext_link = substitute (cfg.presentation['ext-link-access-signal'], {cfg.presentation[options.access].class, cfg.presentation[options.access].title, ext_link});	-- add the free-to-read / paywall lock
    	end
    
    	return table.concat	({
    		make_wikilink (link_label_make (options), options.label),				-- redirect, Wikidata link, or locally specified link (in that order)
    		options.separator or '&nbsp;',
    		ext_link
    		});
    end
    
    
    --[[--------------------------< I N T E R N A L _ L I N K _ I D >----------------------------------------------
    
    Formats a wiki-style internal link
    
    ]]
    
    local function internal_link_id(options)
    	local id = mw.ustring.gsub (options.id, '%d', cfg.date_names.local_digits);	-- translate 'local' digits to Western 0-9
    
    	return table.concat (
    		{
    		make_wikilink (link_label_make (options), options.label),				-- wiki-link the identifier label
    		options.separator or '&nbsp;',											-- add the separator
    		make_wikilink (
    			table.concat (
    				{
    				options.prefix,
    				id,																-- translated to Western digits
    				options.suffix or ''
    				}),
    			substitute (cfg.presentation['bdi'], {'', mw.text.nowiki (options.id)})	-- bdi tags to prevent Latin script identifiers from being reversed at RTL language wikis
    			);																	-- nowiki because MediaWiki still has magic links for ISBN and the like; TODO: is it really required?
    		});
    end
    
    
    --[[--------------------------< I S _ E M B A R G O E D >------------------------------------------------------
    
    Determines if a PMC identifier's online version is embargoed. Compares the date in |pmc-embargo-date= against today's date.  If embargo date is
    in the future, returns the content of |pmc-embargo-date=; otherwise, returns an empty string because the embargo has expired or because
    |pmc-embargo-date= was not set in this cite.
    
    ]]
    
    local function is_embargoed (embargo)
    	if is_set (embargo) then
    		local lang = mw.getContentLanguage();
    		local good1, embargo_date, todays_date;
    		good1, embargo_date = pcall (lang.formatDate, lang, 'U', embargo);
    		todays_date = lang:formatDate ('U');
    	
    		if good1 then															-- if embargo date is a good date
    			if tonumber (embargo_date) >= tonumber (todays_date) then			-- is embargo date is in the future?
    				return embargo;													-- still embargoed
    			else
    				set_message ('maint_pmc_embargo');								-- embargo has expired; add main cat
    				return '';														-- unset because embargo has expired
    			end
    		end
    	end
    	return '';																	-- |pmc-embargo-date= not set return empty string
    end
    
    
    --[=[-------------------------< I S _ V A L I D _ B I O R X I V _ D A T E >------------------------------------
    
    returns true if:
    	2019-12-11T00:00Z <= biorxiv_date < today + 2 days
    	
    The dated form of biorxiv identifier has a start date of 2019-12-11.  The Unix timestamp for that date is {{#time:U|2019-12-11}} = 1576022400
    
    biorxiv_date is the date provided in those |biorxiv= parameter values that are dated at time 00:00:00 UTC
    today is the current date at time 00:00:00 UTC plus 48 hours
    	if today is 2015-01-01T00:00:00 then
    		adding 24 hours gives 2015-01-02T00:00:00 – one second more than today
    		adding 24 hours gives 2015-01-03T00:00:00 – one second more than tomorrow
    
    This function does not work if it is fed month names for languages other than English.  Wikimedia #time: parser
    apparently doesn't understand non-English date month names. This function will always return false when the date
    contains a non-English month name because good1 is false after the call to lang.formatDate().  To get around that
    call this function with YYYY-MM-DD format dates.
    
    ]=]
    
    local function is_valid_biorxiv_date (biorxiv_date)
    	local good1, good2;
    	local biorxiv_ts, tomorrow_ts;												-- to hold Unix timestamps representing the dates
    	local lang_object = mw.getContentLanguage();
    
    	good1, biorxiv_ts = pcall (lang_object.formatDate, lang_object, 'U', biorxiv_date );		-- convert biorxiv_date value to Unix timestamp 
    	good2, tomorrow_ts = pcall (lang_object.formatDate, lang_object, 'U', 'today + 2 days' );	-- today midnight + 2 days is one second more than all day tomorrow
    	
    	if good1 and good2 then														-- lang.formatDate() returns a timestamp in the local script which tonumber() may not understand
    		biorxiv_ts = tonumber (biorxiv_ts) or lang_object:parseFormattedNumber (biorxiv_ts);	-- convert to numbers for the comparison;
    		tomorrow_ts = tonumber (tomorrow_ts) or lang_object:parseFormattedNumber (tomorrow_ts);
    	else
    		return false;															-- one or both failed to convert to Unix timestamp
    	end
    
    	return ((1576022400 <= biorxiv_ts) and (biorxiv_ts < tomorrow_ts))			-- 2012-12-11T00:00Z <= biorxiv_date < tomorrow's date
    end
    
    
    --[[--------------------------< IS _ V A L I D _ I S X N >-----------------------------------------------------
    
    ISBN-10 and ISSN validator code calculates checksum across all ISBN/ISSN digits including the check digit.
    ISBN-13 is checked in isbn().
    
    If the number is valid the result will be 0. Before calling this function, ISBN/ISSN must be checked for length
    and stripped of dashes, spaces and other non-ISxN characters.
    
    ]]
    
    local function is_valid_isxn (isxn_str, len)
    	local temp = 0;
    	isxn_str = { isxn_str:byte(1, len) };										-- make a table of byte values '0' → 0x30 .. '9' → 0x39, 'X' → 0x58
    	len = len + 1;																-- adjust to be a loop counter
    	for i, v in ipairs( isxn_str ) do											-- loop through all of the bytes and calculate the checksum
    		if v == string.byte( "X" ) then											-- if checkdigit is X (compares the byte value of 'X' which is 0x58)
    			temp = temp + 10*( len - i );										-- it represents 10 decimal
    		else
    			temp = temp + tonumber( string.char(v) )*(len-i);
    		end
    	end
    	return temp % 11 == 0;														-- returns true if calculation result is zero
    end
    
    
    --[[--------------------------< IS _ V A L I D _ I S X N _ 1 3 >-----------------------------------------------
    
    ISBN-13 and ISMN validator code calculates checksum across all 13 ISBN/ISMN digits including the check digit.
    If the number is valid, the result will be 0. Before calling this function, ISBN-13/ISMN must be checked for length
    and stripped of dashes, spaces and other non-ISxN-13 characters.
    
    ]]
    
    local function is_valid_isxn_13 (isxn_str)
    	local temp=0;
    	
    	isxn_str = { isxn_str:byte(1, 13) };										-- make a table of byte values '0' → 0x30 .. '9' → 0x39
    	for i, v in ipairs( isxn_str ) do
    		temp = temp + (3 - 2*(i % 2)) * tonumber( string.char(v) );				-- multiply odd index digits by 1, even index digits by 3 and sum; includes check digit
    	end
    	return temp % 10 == 0;														-- sum modulo 10 is zero when ISBN-13/ISMN is correct
    end
    
    
    --[[--------------------------< N O R M A L I Z E _ L C C N >--------------------------------------------------
    
    LCCN normalization (http://www.loc.gov/marc/lccn-namespace.html#normalization)
    1. Remove all blanks.
    2. If there is a forward slash (/) in the string, remove it, and remove all characters to the right of the forward slash.
    3. If there is a hyphen in the string:
    	a. Remove it.
    	b. Inspect the substring following (to the right of) the (removed) hyphen. Then (and assuming that steps 1 and 2 have been carried out):
    		1. All these characters should be digits, and there should be six or less. (not done in this function)
    		2. If the length of the substring is less than 6, left-fill the substring with zeroes until the length is six.
    
    Returns a normalized LCCN for lccn() to validate.  There is no error checking (step 3.b.1) performed in this function.
    ]]
    
    local function normalize_lccn (lccn)
    	lccn = lccn:gsub ("%s", "");												-- 1. strip whitespace
    
    	if nil ~= string.find (lccn, '/') then
    		lccn = lccn:match ("(.-)/");											-- 2. remove forward slash and all character to the right of it
    	end
    
    	local prefix
    	local suffix
    	prefix, suffix = lccn:match ("(.+)%-(.+)");									-- 3.a remove hyphen by splitting the string into prefix and suffix
    
    	if nil ~= suffix then														-- if there was a hyphen
    		suffix = string.rep("0", 6-string.len (suffix)) .. suffix;				-- 3.b.2 left fill the suffix with 0s if suffix length less than 6
    		lccn = prefix..suffix;													-- reassemble the LCCN
    	end
    	
    	return lccn;
    	end
    
    
    --============================<< I D E N T I F I E R   F U N C T I O N S >>====================================
    
    --[[--------------------------< A R X I V >--------------------------------------------------------------------
    
    See: http://arxiv.org/help/arxiv_identifier
    
    format and error check arXiv identifier.  There are three valid forms of the identifier:
    the first form, valid only between date codes 9107 and 0703, is:
    	arXiv:<archive>.<class>/<date code><number><version>
    where:
    	<archive> is a string of alpha characters - may be hyphenated; no other punctuation
    	<class> is a string of alpha characters - may be hyphenated; no other punctuation; not the same as |class= parameter which is not supported in this form
    	<date code> is four digits in the form YYMM where YY is the last two digits of the four-digit year and MM is the month number January = 01
    		first digit of YY for this form can only 9 and 0
    	<number> is a three-digit number
    	<version> is a 1 or more digit number preceded with a lowercase v; no spaces (undocumented)
    	
    the second form, valid from April 2007 through December 2014 is:
    	arXiv:<date code>.<number><version>
    where:
    	<date code> is four digits in the form YYMM where YY is the last two digits of the four-digit year and MM is the month number January = 01
    	<number> is a four-digit number
    	<version> is a 1 or more digit number preceded with a lowercase v; no spaces
    
    the third form, valid from January 2015 is:
    	arXiv:<date code>.<number><version>
    where:
    	<date code> and <version> are as defined for 0704-1412
    	<number> is a five-digit number
    ]]
    
    local function arxiv (id, class)
    	local handler = cfg.id_handlers['ARXIV'];
    	local year, month, version;
    	local err_cat = false;														-- assume no error message
    	local text;																	-- output text
    	
    	if id:match("^%a[%a%.%-]+/[90]%d[01]%d%d%d%d$") or id:match("^%a[%a%.%-]+/[90]%d[01]%d%d%d%dv%d+$") then	-- test for the 9107-0703 format with or without version
    		year, month = id:match("^%a[%a%.%-]+/([90]%d)([01]%d)%d%d%d[v%d]*$");
    		year = tonumber(year);
    		month = tonumber(month);
    		if ((not (90 < year or 8 > year)) or (1 > month or 12 < month)) or		-- if invalid year or invalid month
    			((91 == year and 7 > month) or (7 == year and 3 < month)) then		-- if years ok, are starting and ending months ok?
    				err_cat = true;													-- flag for error message
    		end
    
    	elseif id:match("^%d%d[01]%d%.%d%d%d%d$") or id:match("^%d%d[01]%d%.%d%d%d%dv%d+$") then	-- test for the 0704-1412 with or without version
    		year, month = id:match("^(%d%d)([01]%d)%.%d%d%d%d[v%d]*$");
    		year = tonumber(year);
    		month = tonumber(month);
    		if ((7 > year) or (14 < year) or (1 > month or 12 < month)) or			-- is year invalid or is month invalid? (doesn't test for future years)
    			((7 == year) and (4 > month)) then									-- when year is 07, is month invalid (before April)?
    				err_cat = true;													-- flag for error message
    		end
    
    	elseif id:match("^%d%d[01]%d%.%d%d%d%d%d$") or id:match("^%d%d[01]%d%.%d%d%d%d%dv%d+$") then	-- test for the 1501- format with or without version
    		year, month = id:match("^(%d%d)([01]%d)%.%d%d%d%d%d[v%d]*$");
    		year = tonumber(year);
    		month = tonumber(month);
    		if ((15 > year) or (1 > month or 12 < month)) then						-- is year invalid or is month invalid? (doesn't test for future years)
    				err_cat = true;													-- flag for error message
    		end
    
    	else
    		err_cat = true;															-- not a recognized format; flag for error message
    	end
    
    	err_cat = err_cat and table.concat ({' ', set_message ('err_bad_arxiv')}) or '';	-- set error message if flag is true
    	
    	text = external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
    			prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode, access = handler.access}) .. err_cat;
    
    	if is_set (class) then
    		if id:match ('^%d+') then
    			text = table.concat ({text, ' [[//arxiv.org/archive/', class, ' ', class, ']]'});	-- external link within square brackets, not wikilink
    		else
    			text = table.concat ({text, ' ', set_message ('err_class_ignored')});		
    		end
    	end
    
    	return text;	
    end
    
    
    --[[--------------------------< B I B C O D E >--------------------------------------------------------------------
    
    Validates (sort of) and formats a bibcode ID.
    
    Format for bibcodes is specified here: http://adsabs.harvard.edu/abs_doc/help_pages/data.html#bibcodes
    
    But, this: 2015arXiv151206696F is apparently valid so apparently, the only things that really matter are length, 19 characters
    and first four digits must be a year.  This function makes these tests:
    	length must be 19 characters
    	characters in position
    		1–4 must be digits and must represent a year in the range of 1000 – next year
    		5 must be a letter
    		6–8 must be letter, digit, ampersand, or dot (ampersand cannot directly precede a dot; &. )
    		9–18 must be letter, digit, or dot
    		19 must be a letter or dot
    
    ]]
    
    local function bibcode (id, access)
    	local handler = cfg.id_handlers['BIBCODE'];
    	local err_type;
    	local year;
    
    	local text = external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
    		prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode,
    		access = access});
    	
    	if 19 ~= id:len() then
    		err_type = cfg.err_msg_supl.length;
    	else
    		year = id:match ("^(%d%d%d%d)[%a][%w&%.][%w&%.][%w&%.][%w.]+[%a%.]$");
    		if not year then														-- if nil then no pattern match
    			err_type = cfg.err_msg_supl.value;									-- so value error
    		else
    			local next_year = tonumber(os.date ('%Y')) + 1;						-- get the current year as a number and add one for next year
    			year = tonumber (year);												-- convert year portion of bibcode to a number
    			if (1000 > year) or (year > next_year) then
    				err_type = cfg.err_msg_supl.year;								-- year out of bounds
    			end
    			if id:find('&%.') then
    				err_type = cfg.err_msg_supl.journal;							-- journal abbreviation must not have '&.' (if it does it's missing a letter)
    			end
    		end
    	end
    
    	if is_set (err_type) then													-- if there was an error detected
    		text = text .. ' ' .. set_message( 'err_bad_bibcode', {err_type});
    	end
    	return text;
    end
    
    
    --[[--------------------------< B I O R X I V >-----------------------------------------------------------------
    
    Format bioRxiv ID and do simple error checking.  Before 2019-12-11, biorXiv IDs were 10.1101/ followed by exactly
    6 digits.  After 2019-12-11, biorXiv IDs retained the six-digit identifier but prefixed that with a yyyy.mm.dd. 
    date and suffixed with an optional version identifier.
    
    The bioRxiv ID is the string of characters:
    	https://doi.org/10.1101/078733 -> 10.1101/078733
    or a date followed by a six-digit number followed by an optional version indicator 'v' and one or more digits:
    	https://www.biorxiv.org/content/10.1101/2019.12.11.123456v2 -> 10.1101/2019.12.11.123456v2
    	
    see https://www.biorxiv.org/about-biorxiv
    
    ]]
    
    local function biorxiv(id)
    	local handler = cfg.id_handlers['BIORXIV'];
    	local err_cat = true;														-- flag; assume that there will be an error
    	
    	local patterns = {
    		'^10.1101/%d%d%d%d%d%d$',												-- simple 6-digit identifier (before 2019-12-11)
    		'^10.1101/(20[1-9]%d)%.([01]%d)%.([0-3]%d)%.%d%d%d%d%d%dv%d+$',			-- y.m.d. date + 6-digit identifier + version (after 2019-12-11)
    		'^10.1101/(20[1-9]%d)%.([01]%d)%.([0-3]%d)%.%d%d%d%d%d%d$',				-- y.m.d. date + 6-digit identifier (after 2019-12-11)
    		}
    	
    	for _, pattern in ipairs (patterns) do										-- spin through the patterns looking for a match
    		if id:match (pattern) then
    			local y, m, d = id:match (pattern);									-- found a match, attempt to get year, month and date from the identifier
    
    			if m then															-- m is nil when id is the six-digit form
    				if not is_valid_biorxiv_date (y .. '-' .. m .. '-' .. d) then	-- validate the encoded date; TODO: don't ignore leap-year and actual month lengths ({{#time:}} is a poor date validator)
    					break;														-- date fail; break out early so we don't unset the error message
    				end
    			end
    			err_cat = nil;														-- we found a match so unset the error message
    			break;																-- and done
    		end
    	end																			-- err_cat remains set here when no match
    
    	return external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
    			prefix = handler.prefix, id = id, separator = handler.separator,
    			encode = handler.encode, access = handler.access}) .. (err_cat and (' ' .. set_message( 'err_bad_biorxiv')) or '');
    end
    
    
    --[[--------------------------< C I T E S E E R X >------------------------------------------------------------
    
    CiteSeerX use their own notion of "doi" (not to be confused with the identifiers resolved via doi.org).
    
    The description of the structure of this identifier can be found at Help_talk:Citation_Style_1/Archive_26#CiteSeerX_id_structure
    ]]
    
    local function citeseerx (id)
    	local handler = cfg.id_handlers['CITESEERX'];
    	local matched;
    	
    	local text = external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
    		prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode,
    		access = handler.access});
    	
    	matched = id:match ("^10%.1%.1%.[1-9]%d?%d?%d?%.[1-9]%d?%d?%d?$");
    	if not matched then
    		text = text .. ' ' .. set_message( 'err_bad_citeseerx' );
    	end
    	return text;
    end
    
    
    --[[--------------------------< D O I >------------------------------------------------------------------------
    
    Formats a DOI and checks for DOI errors.
    
    DOI names contain two parts: prefix and suffix separated by a forward slash.
    	Prefix: directory indicator '10.' followed by a registrant code
    	Suffix: character string of any length chosen by the registrant
    
    This function checks a DOI name for: prefix/suffix.  If the DOI name contains spaces or endashes, or, if it ends
    with a period or a comma, this function will emit a bad_doi error message.
    
    DOI names are case-insensitive and can incorporate any printable Unicode characters so the test for spaces, endash,
    and terminal punctuation may not be technically correct but it appears, that in practice these characters are rarely
    if ever used in DOI names.
    
    ]]
    
    local function doi (id, inactive, access, ignore_invalid)
    	local err_cat;
    	local handler = cfg.id_handlers['DOI'];
    	
    	local text;
    	if is_set (inactive) then
    		local inactive_year = inactive:match("%d%d%d%d") or '';					-- try to get the year portion from the inactive date
    		local inactive_month, good;
    
    		if is_set (inactive_year) then
    			if 4 < inactive:len() then											-- inactive date has more than just a year (could be anything)
    				local lang_obj = mw.getContentLanguage();						-- get a language object for this wiki
    				good, inactive_month = pcall (lang_obj.formatDate, lang_obj, 'F', inactive);	-- try to get the month name from the inactive date
    				if not good then
    					inactive_month = nil;										-- something went wrong so make sure this is unset
    				end
    			end
    		else
    			inactive_year = nil;												-- |doi-broken-date= has something but it isn't a date
    		end
    		
    		if is_set(inactive_year) and is_set (inactive_month) then
    			set_message ('maint_doi_inactive_dated', {inactive_year, inactive_month, ' '});
    		elseif is_set(inactive_year) then
    			set_message ('maint_doi_inactive_dated', {inactive_year, '', ''});
    		else
    			set_message ('maint_doi_inactive');
    		end
    		inactive = " (" .. cfg.messages['inactive'] .. ' ' .. inactive .. ')';
    	end
    
    	local registrant = id:match ('^10%.([^/]+)/[^%s–]-[^%.,]$');				-- registrant set when DOI has the proper basic form
    	
    	local registrant_err_patterns = {											-- these patterns are for code ranges that are not supported 
    		'^[^1-3]%d%d%d%d%.%d%d*$',												-- 5 digits with subcode (0xxxx, 40000+); accepts: 10000–39999
    		'^[^1-4]%d%d%d%d$',														-- 5 digits without subcode (0xxxx, 40000+); accepts: 10000–49999
    		'^[^1-9]%d%d%d%.%d%d*$',												-- 4 digits with subcode (0xxx); accepts: 1000–9999
    		'^[^1-9]%d%d%d$',														-- 4 digits without subcode (0xxx); accepts: 1000–9999
    		'^%d%d%d%d%d%d+',														-- 6 or more digits
    		'^%d%d?%d?$',															-- less than 4 digits without subcode (with subcode is legitimate)
    		'^5555$',																-- test registrant will never resolve
    		'%s',																	-- any space character in registrant
    		}
    
    	if not ignore_invalid then
    		if registrant then -- when DOI has proper form
    			for i, pattern in ipairs (registrant_err_patterns) do -- spin through error patterns
    				if registrant:match (pattern) then -- to validate registrant codes
    					err_cat = ' ' .. set_message ('err_bad_doi'); -- when found, mark this DOI as bad
    					break; -- and done
    				end
    			end
    		else
    			err_cat = ' ' .. set_message ('err_bad_doi'); -- invalid directory or malformed
    		end
    	else
    		set_message ('maint_doi_ignore');
    	end
    
    	text = external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
    		prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode, access = access,
    		auto_link = not (err_cat or is_set (inactive) or ignore_invalid) and 'doi' or nil -- do not auto-link when |doi-broken-date= has a value or when there is a DOI error or (to play it safe, after all, auto-linking is not essential) when invalid DOIs are ignored
    		}) .. (inactive or '');
    
    	return text .. (err_cat and err_cat or ''); -- parentheses required
    end
    
    
    --[[--------------------------< H D L >------------------------------------------------------------------------
    
    Formats an HDL with minor error checking.
    
    HDL names contain two parts: prefix and suffix separated by a forward slash.
    	Prefix: character string using any character in the UCS-2 character set except '/'
    	Suffix: character string of any length using any character in the UCS-2 character set chosen by the registrant
    
    This function checks a HDL name for: prefix/suffix.  If the HDL name contains spaces, endashes, or, if it ends
    with a period or a comma, this function will emit a bad_hdl error message.
    
    HDL names are case-insensitive and can incorporate any printable Unicode characters so the test for endashes and
    terminal punctuation may not be technically correct but it appears, that in practice these characters are rarely
    if ever used in HDLs.
    
    Query string parameters are named here: http://www.handle.net/proxy_servlet.html.  query strings are not displayed
    but since '?' is an allowed character in an HDL, '?' followed by one of the query parameters is the only way we
    have to detect the query string so that it isn't URL-encoded with the rest of the identifier.
    
    ]]
    
    local function hdl(id, access)
    	local handler = cfg.id_handlers['HDL'];
    	local query_params = {														-- list of known query parameters from http://www.handle.net/proxy_servlet.html
    		'noredirect',
    		'ignore_aliases',
    		'auth',
    		'cert',
    		'index',
    		'type',
    		'urlappend',
    		'locatt',
    		'action',
    		}
    	
    	local hdl, suffix, param = id:match ('(.-)(%?(%a+).+)$');					-- look for query string
    	local found;
    
    	if hdl then																	-- when there are query strings, this is the handle identifier portion
    		for _, q in ipairs (query_params) do									-- spin through the list of query parameters
    			if param:match ('^' .. q) then										-- if the query string begins with one of the parameters
    				found = true;													-- announce a find
    				break;															-- and stop looking
    			end
    		end
    	end
    
    	if found then
    		id = hdl;																-- found so replace id with the handle portion; this will be URL-encoded, suffix will not
    	else
    		suffix = '';															-- make sure suffix is empty string for concatenation else
    	end
    
    	local text = external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
    			prefix = handler.prefix, id = id, suffix = suffix, separator = handler.separator, encode = handler.encode, access = access})
    
    	if nil == id:match("^[^%s–]-/[^%s–]-[^%.,]$") then							-- HDL must contain a forward slash, must not contain spaces, endashes, and must not end with period or comma
    		text = text .. ' ' .. set_message( 'err_bad_hdl' );
    	end
    	return text;
    end
    
    
    --[[--------------------------< I S B N >----------------------------------------------------------------------
    
    Determines whether an ISBN string is valid
    
    ]]
    
    local function isbn (isbn_str, ignore_invalid)
    	local handler = cfg.id_handlers['ISBN'];
    	local function return_result (check, err_type)								-- local function to handle the various returns
    		local ISBN = internal_link_id ({link = handler.link, label = handler.label, redirect = handler.redirect,
    						prefix = handler.prefix, id = isbn_str, separator = handler.separator});
    		if ignore_invalid then													-- if ignoring ISBN errors
    			set_message ('maint_isbn_ignore');									-- add a maint category even when there is no error
    		else																	-- here when not ignoring
    			if not check then													-- and there is an error
    				return ISBN .. set_message ('err_bad_isbn', {err_type}, false, ' ');	-- display an error message
    			end
    		end
    		return ISBN;
    	end
    
    	if nil ~= isbn_str:match ('[^%s-0-9X]') then
    		return return_result (false, cfg.err_msg_supl.char);					-- fail if isbn_str contains anything but digits, hyphens, or the uppercase X
    	end
    
    	local id = isbn_str:gsub ('[%s-]', '');										-- remove hyphens and whitespace
    
    	local len = id:len();
     
    	if len ~= 10 and len ~= 13 then
    		return return_result (false, cfg.err_msg_supl.length);					-- fail if incorrect length
    	end
    
    	if len == 10 then
    		if id:match ('^%d*X?$') == nil then										-- fail if isbn_str has 'X' anywhere but last position
    			return return_result (false, cfg.err_msg_supl.form);									
    		end
    		return return_result (is_valid_isxn(id, 10), cfg.err_msg_supl.check);
    	else
    		if id:match ('^%d+$') == nil then
    			return return_result (false, cfg.err_msg_supl.char);				-- fail if ISBN-13 is not all digits
    		end
    		if id:match ('^97[89]%d*$') == nil then
    			return return_result (false, cfg.err_msg_supl.prefix);				-- fail when ISBN-13 does not begin with 978 or 979
    		end
    		if id:match ('^9790') then
    			return return_result (false, cfg.err_msg_supl.group);				-- group identifier '0' is reserved to ISMN
    		end
    		return return_result (is_valid_isxn_13 (id), cfg.err_msg_supl.check);
    	end
    end
    
    
    --[[--------------------------< A S I N >----------------------------------------------------------------------
    
    Formats a link to Amazon.  Do simple error checking: ASIN must be mix of 10 numeric or uppercase alpha
    characters.  If a mix, first character must be uppercase alpha; if all numeric, ASINs must be 10-digit
    ISBN. If 10-digit ISBN, add a maintenance category so a bot or AWB script can replace |asin= with |isbn=.
    Error message if not 10 characters, if not ISBN-10, if mixed and first character is a digit.
    
    |asin=630....... is (apparently) not a legitimate ISBN though it checksums as one; these do not cause this
    function to emit the maint_asin message
    
    This function is positioned here because it calls isbn()
    
    ]]
    
    local function asin (id, domain)
    	local err_cat = ""
    
    	if not id:match("^[%d%u][%d%u][%d%u][%d%u][%d%u][%d%u][%d%u][%d%u][%d%u][%d%u]$") then
    		err_cat = ' ' .. set_message ('err_bad_asin');							-- ASIN is not a mix of 10 uppercase alpha and numeric characters
    	else
    		if id:match("^%d%d%d%d%d%d%d%d%d[%dX]$") then							-- if 10-digit numeric (or 9 digits with terminal X)
    			if isbn (id) then													-- see if ASIN value is or validates as ISBN-10
    				if not id:find ('^630') then									-- 630xxxxxxx is (apparently) not a valid isbn prefix but is used by amazon as a numeric identifier
    					set_message ('maint_asin');									-- begins with something other than 630 so possibly an isbn
    				end
    			elseif not is_set (err_cat) then
    				err_cat = ' ' .. set_message ('err_bad_asin');					-- ASIN is not ISBN-10
    			end
    		elseif not id:match("^%u[%d%u]+$") then
    			err_cat = ' ' .. set_message ('err_bad_asin');						-- asin doesn't begin with uppercase alpha
    		end
    	end
    	if not is_set(domain) then 
    		domain = "com";
    	elseif in_array (domain, {'jp', 'uk'}) then									-- Japan, United Kingdom
    		domain = "co." .. domain;
    	elseif in_array (domain, {'au', 'br', 'mx'}) then							-- Australia, Brazil, Mexico
    		domain = "com." .. domain;
    	end
    	local handler = cfg.id_handlers['ASIN'];
    	return external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
    		prefix = handler.prefix .. domain .. "/dp/",
    		id = id, encode = handler.encode, separator = handler.separator}) .. err_cat;
    end
    
    
    --[[--------------------------< I S M N >----------------------------------------------------------------------
    
    Determines whether an ISMN string is valid.  Similar to ISBN-13, ISMN is 13 digits beginning 979-0-... and uses the
    same check digit calculations.  See http://www.ismn-international.org/download/Web_ISMN_Users_Manual_2008-6.pdf
    section 2, pages 9–12.
    
    ]]
    
    local function ismn (id)
    	local handler = cfg.id_handlers['ISMN'];
    	local text;
    	local valid_ismn = true;
    	local id_copy;
    
    	id_copy = id;																-- save a copy because this testing is destructive
    	id = id:gsub ('[%s-]', '');													-- remove hyphens and white space
    
    	if 13 ~= id:len() or id:match( "^9790%d*$" ) == nil then					-- ISMN must be 13 digits and begin with 9790
    		valid_ismn = false;
    	else
    		valid_ismn=is_valid_isxn_13 (id);										-- validate ISMN
    	end
    
    	--	text = internal_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,		-- use this (or external version) when there is some place to link to
    	--		prefix = handler.prefix, id = id_copy, separator = handler.separator, encode = handler.encode})
    
    	text = table.concat (														-- because no place to link to yet
    		{
    		make_wikilink (link_label_make (handler), handler.label),
    		handler.separator,
    		id_copy
    		});
    
    	if false == valid_ismn then
    		text = text .. ' ' .. set_message( 'err_bad_ismn' )						-- add an error message if the ISMN is invalid
    	end 
    	
    	return text;
    end
    
    
    --[[--------------------------< I S S N >----------------------------------------------------------------------
    
    Validate and format an ISSN.  This code fixes the case where an editor has included an ISSN in the citation but
    has separated the two groups of four digits with a space.  When that condition occurred, the resulting link looked
    like this:
    
    	|issn=0819 4327 gives: [http://www.worldcat.org/issn/0819 4327 0819 4327]	-- can't have spaces in an external link
    	
    This code now prevents that by inserting a hyphen at the ISSN midpoint.  It also validates the ISSN for length
    and makes sure that the checkdigit agrees with the calculated value.  Incorrect length (8 digits), characters
    other than 0-9 and X, or checkdigit / calculated value mismatch will all cause a check ISSN error message.  The
    ISSN is always displayed with a hyphen, even if the ISSN was given as a single group of 8 digits.
    
    ]]
    
    local function issn (id, e, ignore_invalid)
    	local issn_copy = id;														-- save a copy of unadulterated ISSN; use this version for display if ISSN does not validate
    	local handler;
    	local text;
    	local valid_issn = true;
    	
    	handler = cfg.id_handlers[e and 'EISSN' or 'ISSN'];
    
    	id = id:gsub ('[%s-]', '');													-- remove hyphens and whitespace
    
    	if 8 ~= id:len() or nil == id:match( "^%d*X?$" ) then						-- validate the ISSN: 8 digits long, containing only 0-9 or X in the last position
    		valid_issn = false;														-- wrong length or improper character
    	else
    		valid_issn = is_valid_isxn(id, 8);										-- validate ISSN
    	end
    
    	if true == valid_issn then
    		id = string.sub( id, 1, 4 ) .. "-" .. string.sub( id, 5 );				-- if valid, display correctly formatted version
    	else
    		id = issn_copy;															-- if not valid, show the invalid ISSN with error message
    	end
    
    	text = external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
    		prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode})
    
    	if ignore_invalid then
    		set_message ('maint_issn_ignore');
    	else
    		if false == valid_issn then
    			text = text .. ' ' .. set_message ('err_bad_issn', e and 'e' or '');	-- add an error message if the ISSN is invalid
    		end 
    	end
    	
    	return text
    end
    
    
    --[[--------------------------< J F M >-----------------------------------------------------------------------
    
    A numerical identifier in the form nn.nnnn.nn
    
    ]]
    
    local function jfm (id)
    	local handler = cfg.id_handlers['JFM'];
    	local id_num;
    	local err_cat = '';
    	
    	id_num = id:match ('^[Jj][Ff][Mm](.*)$');									-- identifier with jfm prefix; extract identifier
    
    	if is_set (id_num) then
    		set_message ('maint_jfm_format');
    	else																		-- plain number without mr prefix
    		id_num = id;															-- if here id does not have prefix
    	end
    
    	if id_num and id_num:match('^%d%d%.%d%d%d%d%.%d%d$') then
    		id = id_num;															-- jfm matches pattern
    	else
    		err_cat = ' ' .. set_message( 'err_bad_jfm' );							-- set an error message
    	end
    	
    	return external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
    			prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode}) .. err_cat;
    end
    
    
    --[[--------------------------< L C C N >----------------------------------------------------------------------
    
    Format LCCN link and do simple error checking.  LCCN is a character string 8-12 characters long. The length of
    the LCCN dictates the character type of the first 1-3 characters; the rightmost eight are always digits.
    http://info-uri.info/registry/OAIHandler?verb=GetRecord&metadataPrefix=reg&identifier=info:lccn/
    
    length = 8 then all digits
    length = 9 then lccn[1] is lowercase alpha
    length = 10 then lccn[1] and lccn[2] are both lowercase alpha or both digits
    length = 11 then lccn[1] is lower case alpha, lccn[2] and lccn[3] are both lowercase alpha or both digits
    length = 12 then lccn[1] and lccn[2] are both lowercase alpha
    
    ]]
    
    local function lccn(lccn)
    	local handler = cfg.id_handlers['LCCN'];
    	local err_cat = '';															-- presume that LCCN is valid
    	local id = lccn;															-- local copy of the LCCN
    
    	id = normalize_lccn (id);													-- get canonical form (no whitespace, hyphens, forward slashes)
    	local len = id:len();														-- get the length of the LCCN
    
    	if 8 == len then
    		if id:match("[^%d]") then												-- if LCCN has anything but digits (nil if only digits)
    			err_cat = ' ' .. set_message ('err_bad_lccn');						-- set an error message
    		end
    	elseif 9 == len then														-- LCCN should be adddddddd
    		if nil == id:match("%l%d%d%d%d%d%d%d%d") then							-- does it match our pattern?
    			err_cat = ' ' .. set_message ('err_bad_lccn');						-- set an error message
    		end
    	elseif 10 == len then														-- LCCN should be aadddddddd or dddddddddd
    		if id:match("[^%d]") then												-- if LCCN has anything but digits (nil if only digits) ...
    			if nil == id:match("^%l%l%d%d%d%d%d%d%d%d") then					-- ... see if it matches our pattern
    				err_cat = ' ' .. set_message ('err_bad_lccn');					-- no match, set an error message
    			end
    		end
    	elseif 11 == len then														-- LCCN should be aaadddddddd or adddddddddd
    		if not (id:match("^%l%l%l%d%d%d%d%d%d%d%d") or id:match("^%l%d%d%d%d%d%d%d%d%d%d")) then	-- see if it matches one of our patterns
    			err_cat = ' ' .. set_message ('err_bad_lccn');						-- no match, set an error message
    		end
    	elseif 12 == len then														-- LCCN should be aadddddddddd
    		if not id:match("^%l%l%d%d%d%d%d%d%d%d%d%d") then						-- see if it matches our pattern
    			err_cat = ' ' .. set_message ('err_bad_lccn');						-- no match, set an error message
    		end
    	else
    		err_cat = ' ' .. set_message ('err_bad_lccn');							-- wrong length, set an error message
    	end
    
    	if not is_set (err_cat) and nil ~= lccn:find ('%s') then
    		err_cat = ' ' .. set_message ('err_bad_lccn');							-- lccn contains a space, set an error message
    	end
    
    	return external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
    			prefix = handler.prefix, id = lccn, separator = handler.separator, encode = handler.encode}) .. err_cat;
    end
    
    
    --[[--------------------------< M R >--------------------------------------------------------------------------
    
    A seven digit number; if not seven digits, zero-fill leading digits to make seven digits.
    
    ]]
    
    local function mr (id)
    	local handler = cfg.id_handlers['MR'];
    	local id_num;
    	local id_len;
    	local err_cat = '';
    	
    	id_num = id:match ('^[Mm][Rr](%d+)$');										-- identifier with mr prefix
    
    	if is_set (id_num) then
    		set_message ('maint_mr_format');										-- add maint cat
    	else																		-- plain number without mr prefix
    		id_num = id:match ('^%d+$');											-- if here id is all digits
    	end
    
    	id_len = id_num and id_num:len() or 0;
    	if (7 >= id_len) and (0 ~= id_len) then
    		id = string.rep ('0', 7-id_len ) .. id_num;								-- zero-fill leading digits
    	else
    		err_cat = ' ' .. set_message ('err_bad_mr');							-- set an error message
    	end
    	
    	return external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
    			prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode}) .. err_cat;
    end
    
    
    --[[--------------------------< O C L C >----------------------------------------------------------------------
    
    Validate and format an OCLC ID.  https://www.oclc.org/batchload/controlnumber.en.html {{dead link}}
    archived at: https://web.archive.org/web/20161228233804/https://www.oclc.org/batchload/controlnumber.en.html
    
    ]]
    
    local function oclc (id)
    	local handler = cfg.id_handlers['OCLC'];
    	local number;
    	local err_msg = '';															-- empty string for concatenation
    	
    	if id:match('^ocm%d%d%d%d%d%d%d%d$') then									-- ocm prefix and 8 digits; 001 field (12 characters)
    		number = id:match('ocm(%d+)');											-- get the number
    	elseif id:match('^ocn%d%d%d%d%d%d%d%d%d$') then								-- ocn prefix and 9 digits; 001 field (12 characters)
    		number = id:match('ocn(%d+)');											-- get the number
    	elseif id:match('^on%d%d%d%d%d%d%d%d%d%d+$') then							-- on prefix and 10 or more digits; 001 field (12 characters)
    		number = id:match('^on(%d%d%d%d%d%d%d%d%d%d+)$');						-- get the number
    	elseif id:match('^%(OCoLC%)[1-9]%d*$') then									-- (OCoLC) prefix and variable number digits; no leading zeros; 035 field
    		number = id:match('%(OCoLC%)([1-9]%d*)');								-- get the number
    		if 9 < number:len() then
    			number = nil;														-- constrain to 1 to 9 digits; change this when OCLC issues 10-digit numbers
    		end
    	elseif id:match('^%d+$') then												-- no prefix
    		number = id;															-- get the number
    		if 10 < number:len() then
    			number = nil;														-- constrain to 1 to 10 digits; change this when OCLC issues 11-digit numbers
    		end
    	end
    
    	if number then																-- proper format
    		id = number;															-- exclude prefix, if any, from external link
    	else
    		err_msg = ' ' .. set_message ('err_bad_oclc')							-- add an error message if the id is malformed
    	end
    	
    	local text = external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
    		prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode}) .. err_msg;
    
    	return text;
    end
    
    
    --[[--------------------------< O P E N L I B R A R Y >--------------------------------------------------------
    
    Formats an OpenLibrary link, and checks for associated errors.
    
    ]]
    
    local function openlibrary(id, access)
    	local handler = cfg.id_handlers['OL'];
    	local ident, code = id:gsub('^OL', ''):match("^(%d+([AMW]))$");				-- strip optional OL prefix followed immediately by digits followed by 'A', 'M', or 'W';
    	local error_msg = '';
    	local prefix = {															-- these are appended to the handler.prefix according to code
    		['A']='authors/OL',
    		['M']='books/OL',
    		['W']='works/OL',
    		['X']='OL'																-- not a code; spoof when 'code' in id is invalid
    		};
    
    	if not ident then
    		code = 'X';																-- no code or id completely invalid
    		ident = id;																-- copy id to ident so that we display the flawed identifier
    		error_msg = ' ' .. set_message ('err_bad_ol');
    	end
    
    	return external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
    		prefix = handler.prefix .. prefix[code],
    		id = ident, separator = handler.separator, encode = handler.encode,
    		access = access}) .. error_msg;
    end
    
    
    --[[--------------------------< P M C >------------------------------------------------------------------------
    
    Format a PMC, do simple error checking, and check for embargoed articles.
    
    The embargo parameter takes a date for a value. If the embargo date is in the future the PMC identifier will not
    be linked to the article.  If the embargo date is today or in the past, or if it is empty or omitted, then the
    PMC identifier is linked to the article through the link at cfg.id_handlers['PMC'].prefix.
    
    PMC embargo date testing is done in function is_embargoed () which is called earlier because when the citation
    has |pmc=<value> but does not have a |url= then |title= is linked with the PMC link.  Function is_embargoed ()
    returns the embargo date if the PMC article is still embargoed, otherwise it returns an empty string.
    
    PMCs are sequential numbers beginning at 1 and counting up.  This code checks the PMC to see that it contains only digits and is less
    than test_limit; the value in local variable test_limit will need to be updated periodically as more PMCs are issued.
    
    ]]
    
    local function pmc (id, embargo)
    	local handler = cfg.id_handlers['PMC'];
    	local err_cat;
    	local id_num;
    	local text;
    
    	id_num = id:match ('^[Pp][Mm][Cc](%d+)$');									-- identifier with PMC prefix
    
    	if is_set (id_num) then
    		set_message ('maint_pmc_format');
    	else																		-- plain number without PMC prefix
    		id_num = id:match ('^%d+$');											-- if here id is all digits
    	end
    
    	if is_set (id_num) then														-- id_num has a value so test it
    		id_num = tonumber(id_num);												-- convert id_num to a number for range testing
    		if 1 > id_num or handler.id_limit < id_num then							-- if PMC is outside test limit boundaries
    			err_cat = ' ' .. set_message ('err_bad_pmc');						-- set an error message
    		else
    			id = tostring (id_num);												-- make sure id is a string
    		end
    	else																		-- when id format incorrect
    		err_cat = ' ' .. set_message ('err_bad_pmc');							-- set an error message
    	end
    	
    	if is_set (embargo) and is_set (is_embargoed (embargo)) then				-- is PMC is still embargoed?
    		text = table.concat (													-- still embargoed so no external link
    			{
    			make_wikilink (link_label_make (handler), handler.label),
    			handler.separator,
    			id,
    			(err_cat and err_cat or '')											-- parens required
    			});
    	else
    		text = external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,	-- no embargo date or embargo has expired, ok to link to article
    			prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode, access = handler.access,
    			auto_link = not err_cat and 'pmc' or nil								-- do not auto-link when PMC has error
    			}) .. (err_cat and err_cat or '');									-- parentheses required
    	end
    	return text;
    end
    
    
    --[[--------------------------< P M I D >----------------------------------------------------------------------
    
    Format PMID and do simple error checking.  PMIDs are sequential numbers beginning at 1 and counting up.  This
    code checks the PMID to see that it contains only digits and is less than test_limit; the value in local variable
    test_limit will need to be updated periodically as more PMIDs are issued.
    
    ]]
    
    local function pmid(id)
    	local handler = cfg.id_handlers['PMID'];
    	local err_cat = '';															-- presume that PMID is valid
    	
    	if id:match("[^%d]") then													-- if PMID has anything but digits
    		err_cat = ' ' .. set_message ('err_bad_pmid');							-- set an error message
    	else																		-- PMID is only digits
    		local id_num = tonumber(id);											-- convert id to a number for range testing
    		if 1 > id_num or handler.id_limit < id_num then							-- if PMID is outside test limit boundaries
    			err_cat = ' ' .. set_message ('err_bad_pmid');						-- set an error message
    		end
    	end
    	
    	return external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
    			prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode}) .. err_cat;
    end
    
    
    --[[--------------------------< S 2 C I D >--------------------------------------------------------------------
    
    Format an S2CID, do simple error checking
    
    S2CIDs are sequential numbers beginning at 1 and counting up.  This code checks the S2CID to see that it is only
    digits and is less than test_limit; the value in local variable test_limit will need to be updated periodically
    as more S2CIDs are issued.
    
    ]]
    
    local function s2cid (id, access)
    	local handler = cfg.id_handlers['S2CID'];
    	local err_cat = '';															-- presume that S2CID is valid
    	local id_num;
    	local text;
    	
    	id_num = id:match ('^[1-9]%d*$');											-- id must be all digits; must not begin with 0; no open access flag
    
     	if is_set (id_num) then														-- id_num has a value so test it
    		id_num = tonumber(id_num);												-- convert id_num to a number for range testing
    		if handler.id_limit < id_num then										-- if S2CID is outside test limit boundaries
    			err_cat = ' ' .. set_message ('bad_s2cid_err');						-- set an error message
    		end
    
    	else																		-- when id format incorrect
    		err_cat = ' ' .. set_message ('bad_s2cid_err');							-- set an error message
    	end
    
    	text = external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
    		prefix = handler.prefix, id = id:gsub ('%.%a%a', ''), separator = handler.separator, encode = handler.encode, access = access}) .. err_cat;
    
    	return text;
    end
    
    
    --[[--------------------------< S B N >------------------------------------------------------------------------
    
    9-digit form of ISBN-10; uses same check-digit validation when SBN is prefixed with an additional '0' to make 10 digits
    
    ]]
    
    local function sbn (id, ignore_invalid)
    	local handler = cfg.id_handlers['SBN'];
    	local function return_result (check, err_type) -- local function to handle the various returns
    		local SBN = internal_link_id ({link = handler.link, label = handler.label, redirect = handler.redirect,
    						prefix = handler.prefix, id = id, separator = handler.separator});
    		if not ignore_invalid then -- if not ignoring SBN errors
    			if not check then
    				return SBN .. set_message ('err_bad_sbn', {err_type}, false, ' '); -- display an error message
    			end
    		else
    			set_message ('maint_isbn_ignore');									-- add a maint category even when there is no error (ToDo: Possibly switch to separate message for SBNs only)
    		end
    		return SBN;
    	end
    
    	if id:match ('[^%s-0-9X]') then
    		return return_result (false, cfg.err_msg_supl.char);					-- fail if SBN contains anything but digits, hyphens, or the uppercase X
    	end
    
    	local ident = id:gsub ('[%s-]', '');											-- remove hyphens and whitespace; they interfere with the rest of the tests
    
    	if  9 ~= ident:len() then
    		return return_result (false, cfg.err_msg_supl.length);					-- fail if incorrect length
    	end
    
    	if ident:match ('^%d*X?$') == nil then
    		return return_result (false, cfg.err_msg_supl.form);					-- fail if SBN has 'X' anywhere but last position
    	end
    
    	return return_result (is_valid_isxn ('0' .. ident, 10), cfg.err_msg_supl.check);
    end
    
    
    --[[--------------------------< S S R N >----------------------------------------------------------------------
    
    Format an SSRN, do simple error checking
    
    SSRNs are sequential numbers beginning at 100? and counting up.  This code checks the SSRN to see that it is
    only digits and is greater than 99 and less than test_limit; the value in local variable test_limit will need
    to be updated periodically as more SSRNs are issued.
    
    ]]
    
    local function ssrn (id)
    	local handler = cfg.id_handlers['SSRN'];
    	local err_cat = '';															-- presume that SSRN is valid
    	local id_num;
    	local text;
    	
    	id_num = id:match ('^%d+$');												-- id must be all digits
    
    	if is_set (id_num) then														-- id_num has a value so test it
    		id_num = tonumber(id_num);												-- convert id_num to a number for range testing
    		if 100 > id_num or handler.id_limit < id_num then						-- if SSRN is outside test limit boundaries
    			err_cat = ' ' .. set_message ('err_bad_ssrn');						-- set an error message
    		end
    	else																		-- when id format incorrect
    		err_cat = ' ' .. set_message ('err_bad_ssrn');							-- set an error message
    	end
    	
    	text = external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
    		prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode, access = handler.access}) .. err_cat;
    
    	return text;
    end
    
    
    --[[--------------------------< U S E N E T _ I D >------------------------------------------------------------
    
    Validate and format a usenet message id.  Simple error checking, looks for 'id-left@id-right' not enclosed in
    '<' and/or '>' angle brackets.
    
    ]]
    
    local function usenet_id (id)
    	local handler = cfg.id_handlers['USENETID'];
    
    	local text = external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
    		prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode})
     
    	if not id:match('^.+@.+$') or not id:match('^[^<].*[^>]$') then				-- doesn't have '@' or has one or first or last character is '< or '>'
    		text = text .. ' ' .. set_message ('err_bad_usenet_id')					-- add an error message if the message id is invalid
    	end 
    	
    	return text
    end
    
    
    --[[--------------------------< Z B L >-----------------------------------------------------------------------
    
    A numerical identifier in the form nnnn.nnnnn - leading zeros in the first quartet optional
    
    format described here: http://emis.mi.sanu.ac.rs/ZMATH/zmath/en/help/search/
    
    temporary format is apparently eight digits.  Anything else is an error
    
    ]]
    
    local function zbl (id)
    	local handler = cfg.id_handlers['ZBL'];
    	local err_cat = '';
    	
    	if id:match('^%d%d%d%d%d%d%d%d$') then										-- is this identifier using temporary format?
    		set_message ('maint_zbl');												-- yes, add maint cat
    	elseif not id:match('^%d?%d?%d?%d%.%d%d%d%d%d$') then						-- not temporary, is it normal format?
    		err_cat = ' ' .. set_message ('err_bad_zbl');							-- no, set an error message
    	end
    	
    	return external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
    			prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode}) .. err_cat;
    end
    
    
    --============================<< I N T E R F A C E   F U N C T I O N S >>==========================================
    
    --[[--------------------------< B U I L D _ I D _ L I S T >--------------------------------------------------------
    
    Takes a table of IDs created by extract_ids() and turns it into a table of formatted ID outputs.
    
    inputs:
    	id_list – table of identifiers built by extract_ids()
    	options – table of various template parameter values used to modify some manually handled identifiers
    
    ]]
    
    local function build_id_list( id_list, options )
    	local new_list, handler = {};
    	local accept;
    
    	local function fallback(k) return { __index = function(t,i) return cfg.id_handlers[k][i] end } end;
    	
    	for k, v in pairs( id_list ) do
    		v, accept = has_accept_as_written (v);									-- remove and note accept-as-written markup if present
    
    		-- k is uppercase identifier name as index to cfg.id_handlers; e.g. cfg.id_handlers['ISBN'], v is a table
    		-- fallback to read-only cfg
    		handler = setmetatable( { ['id'] = v, ['access'] = options.IdAccessLevels[k] }, fallback(k) );
    
    		if handler.mode == 'external' then
    			table.insert( new_list, {handler.label, external_link_id( handler ) } );
    		elseif handler.mode == 'internal' then
    			table.insert( new_list, {handler.label, internal_link_id( handler ) } );
    		elseif handler.mode ~= 'manual' then
    			error( cfg.messages['unknown_ID_mode'] );
    		elseif k == 'ARXIV' then
    			table.insert( new_list, {handler.label, arxiv( v, options.Class ) } ); 
    		elseif k == 'ASIN' then
    			table.insert( new_list, {handler.label, asin( v, options.ASINTLD ) } ); 
    		elseif k == 'BIBCODE' then
    			table.insert( new_list, {handler.label, bibcode( v, handler.access ) } );
    		elseif k == 'BIORXIV' then
    			table.insert( new_list, {handler.label, biorxiv( v ) } );
    		elseif k == 'CITESEERX' then
    			table.insert( new_list, {handler.label, citeseerx( v ) } );
    		elseif k == 'DOI' then
    			table.insert( new_list, {handler.label, doi( v, options.DoiBroken, handler.access, accept) } );
    		elseif k == 'EISSN' then
    			table.insert( new_list, {handler.label, issn( v, true, accept) } );	-- true distinguishes EISSN from ISSN
    		elseif k == 'HDL' then
    			table.insert( new_list, {handler.label, hdl( v, handler.access ) } );
    		elseif k == 'ISBN' then
    			table.insert( new_list, {handler.label, isbn (v, (accept or options.IgnoreISBN)) } );
    		elseif k == 'ISMN' then
    			table.insert( new_list, {handler.label, ismn( v ) } );
    		elseif k == 'ISSN' then
    			table.insert( new_list, {handler.label, issn( v, false, accept) } );
    		elseif k == 'JFM' then
    			table.insert( new_list, {handler.label, jfm( v ) } );
    		elseif k == 'LCCN' then
    			table.insert( new_list, {handler.label, lccn( v ) } );
    		elseif k == 'MR' then
    			table.insert( new_list, {handler.label, mr( v ) } );
    		elseif k == 'OCLC' then
    			table.insert( new_list, {handler.label, oclc( v ) } );
    		elseif k == 'OL' or k == 'OLA' then
    			table.insert( new_list, {handler.label, openlibrary( v, handler.access ) } );
    		elseif k == 'PMC' then
    			table.insert( new_list, {handler.label, pmc( v, options.Embargo ) } );
    		elseif k == 'PMID' then
    			table.insert( new_list, {handler.label, pmid( v ) } );
    		elseif k == 'S2CID' then
    			table.insert( new_list, {handler.label, s2cid( v, handler.access ) } );
    		elseif k == 'SBN' then
    			table.insert( new_list, {handler.label, sbn (v, accept) } );
    		elseif k == 'SSRN' then
    			table.insert( new_list, {handler.label, ssrn( v ) } );
    		elseif k == 'USENETID' then
    			table.insert( new_list, {handler.label, usenet_id( v ) } );
    		elseif k == 'ZBL' then
    			table.insert( new_list, {handler.label, zbl( v ) } );
    		else
    			error( cfg.messages['unknown_manual_ID'] );
    		end
    	end
    	
    	local function comp( a, b )	-- used in following table.sort()
    		return a[1]:lower() < b[1]:lower();
    	end
    	
    	table.sort( new_list, comp );
    	for k, v in ipairs( new_list ) do
    		new_list[k] = v[2];
    	end
    	
    	return new_list;
    end
    
    
    --[[--------------------------< E X T R A C T _ I D S >------------------------------------------------------------
    
    Populates ID table from arguments using configuration settings. Loops through cfg.id_handlers and searches args for
    any of the parameters listed in each cfg.id_handlers['...'].parameters.  If found, adds the parameter and value to
    the identifier list.  Emits redundant error message if more than one alias exists in args
    
    ]]
    
    local function extract_ids( args )
    	local id_list = {};															-- list of identifiers found in args
    	for k, v in pairs( cfg.id_handlers ) do										-- k is uppercase identifier name as index to cfg.id_handlers; e.g. cfg.id_handlers['ISBN'], v is a table
    		v = select_one( args, v.parameters, 'err_redundant_parameters' );			-- v.parameters is a table of aliases for k; here we pick one from args if present
    		if is_set(v) then id_list[k] = v; end									-- if found in args, add identifier to our list
    	end
    	return id_list;
    end
    
    
    --[[--------------------------< E X T R A C T _ I D _ A C C E S S _ L E V E L S >--------------------------------------
    
    Fetches custom id access levels from arguments using configuration settings.
    Parameters which have a predefined access level (e.g. arxiv) do not use this
    function as they are directly rendered as free without using an additional parameter.
    
    access-level values must match the case used in cfg.keywords_lists['id-access'] (lowercase unless there is some special reason for something else)
    
    ]]
    
    local function extract_id_access_levels( args, id_list )
    	local id_accesses_list = {};
    	for k, v in pairs( cfg.id_handlers ) do
    		local access_param = v.custom_access;									-- name of identifier's access-level parameter
    		if is_set(access_param) then
    			local access_level = args[access_param];							-- get the assigned value if there is one
    			if is_set (access_level) then
    				if not in_array (access_level, cfg.keywords_lists['id-access']) then	-- exact match required
    					table.insert( z.message_tail, { set_message( 'invalid_param_val', {access_param, access_level}, true ) } );	
    					access_level = nil;											-- invalid so unset
    				end
    				if not is_set(id_list[k]) then									-- identifier access-level must have a matching identifier
    					table.insert( z.message_tail, { set_message( 'err_param_access_requires_param', {k:lower()}, true ) } );	-- parameter name is uppercase in cfg.id_handlers (k); lowercase for error message
    				end
    				id_accesses_list[k] = cfg.keywords_xlate[access_level];			-- get translated keyword
    			end
    		end
    	end
    	return id_accesses_list;
    end
    
    
    --[[--------------------------< S E T _ S E L E C T E D _ M O D U L E S >--------------------------------------
    
    Sets local cfg table and imported functions table to same (live or sandbox) as that used by the other modules.
    
    ]]
    
    local function set_selected_modules (cfg_table_ptr, utilities_page_ptr)
    	cfg = cfg_table_ptr;
    
    	has_accept_as_written = utilities_page_ptr.has_accept_as_written;			-- import functions from select Module:Citation/CS1/Utilities module
    	is_set = utilities_page_ptr.is_set;								
    	in_array = utilities_page_ptr.in_array;
    	set_message = utilities_page_ptr.set_message;
    	select_one = utilities_page_ptr.select_one;
    	substitute = utilities_page_ptr.substitute;
    	make_wikilink = utilities_page_ptr.make_wikilink;
    
    	z = utilities_page_ptr.z;													-- table of tables in Module:Citation/CS1/Utilities
    end
    
    
    --[[--------------------------< E X P O R T E D   F U N C T I O N S >------------------------------------------
    ]]
    
    return {
    	auto_link_urls = auto_link_urls,											-- table of identifier URLs to be used when auto-linking |title=
    	
    	build_id_list = build_id_list,
    	extract_ids = extract_ids,
    	extract_id_access_levels = extract_id_access_levels,
    	is_embargoed = is_embargoed;
    	set_selected_modules = set_selected_modules;
    	}